Parallax USB Oscilloscope  (Parallax USB 示波器)

 

品名 : Parallax USB示波器 學習套件

編號 : U28119

單價 : NT6300

 

這是示波器的監控程式視窗

[看大圖]


       這是Parallax推出的USB介面示波器(Oscilloscope), 目前可以單獨買(產品編號 : U28014), 也可以買入完整的示波器教學套件 (產品編號 : U28119)在學習套件 部分, 增加一本144頁的"訊號解析"學生手冊, 也附上電子零件, A/D converter, 伺服機等實驗零件

       這個裝置可以透過PC的USB port連接, 直接量測並監看波形; 體積小攜帶方便, 不須外接電源(USB給電源即可), 外額為經過表面處理的金屬蓋, 美觀又安全。

所有的示波器操作都是透過point-to-click (點擊示)的PC視窗, 這套程式軟體提供動態的波形監控或是波形擷取功能。強大的功能包括, trigger setting (觸發設定), 波形量測(MIN, MAX, 頻率與週期), 提供客制化的設定儲存, BMP檔案螢幕抓取; 還有3種游標的波形擷取特殊功能, 如zoom(螢幕縮放), 檢視與精確檢視波形。

"訊號解析"手冊的內容大綱 :

The Understanding Signals Tutorial這本書是對於Parallax USB Oscilloscope產品的豐富精闢的手冊, 裡面的每個章節, 都是應用BASIC Stamp來製作的電路與範例, 書中也談到, 如何操作示波器, 探頭(Probe)的放置等等。

重要章節如下

  • Analog inputs from photoresistors and A/D converters

  • RC-time in resistor-capacitor networks

  • Asynchronous serial communication between the PC and a BASIC Stamp module

  • Synchronous serial communication between a BASIC Stamp and ADC0831 A/D converter

  • Single and dual sine waves

  • Servo pulse signals over an entire range of motion

  • Pulse width modulation with infrared

  • Decoding of handheld infrared remote control signals

  • Voltage amplification and inversion with DC offset with an op-amp

  • All electronic components needed are included in the Understanding Signals Parts and Text kit (see the Components Listing here).

  • BASIC Stamp 2 source code for the experiments in the book is available for free download below.

功能列表 :

  • 2 Channels

  • 單通道取樣頻率 : 1 Ms/s Maximum Sample Rate with One Channel

  • 雙通道取樣頻率 : 500 Ks/s Sample Rate with Two Channels

  • 輸入電壓 : 20 Vpp Maximum Input for Channel 1 and Channel 2

  • 頻寬: 200 kHz Bandwidth

  • 解析度 : 8-Bit Vertical Resolution

  • 輸入阻抗值 : 1 M Ohm Input Impedance

  • 上緣或下緣電壓 : Trigger on Rising or Falling Edge at any Voltage

  • 變數觸發 : Variable Trigger voltage on Channels 1 and 2

  • 水平觸發 : Horizontal Trigger Position Settings at 10%, 50%, and 90%

  • 自動與正常模式 : Auto and Normal Trigger Modes

  • 探頭 : 3 probes

  • USB 1.1 Support (no additional power supply required!)

  • 尺寸 : Size: 5 x 2.25 x 1.5 (in.); 12.7 x 5.7 x 3.8 (cm)

  • 重量 : Weight: 8 oz; 227 gm

  • 軟體(免費) : Parallax Digital Oscilloscope Software CD-ROM (download and evaluate for free below)

  • 額外好處 : 隨時上網免費軟體升級

 系統需求 :

最低標準 :
  • Windows 98 or higher operating system*
  • Pentium 233 MHz processor
  • 32 MB of RAM
  • At least 15 MB of free disk space
  • Graphics card able to display an 800 X 600 resolution at 16-bit color depth.
  • HTML Viewer
  • Mouse or similar pointing device

建議使用規格 :

  • Windows XP
  • Pentium II 450 MHz processor
  • 64 MB of RAM
  • 20 MB free disk space
  • Graphics card able to display a 1024 X 798 or higher resolution at 32-bit color depth.
  • HTML Viewer
  • Mouse or similar pointing device

* - Windows 95 and NT are not supported, Windows XP is recommended.
示波器效能, 取決於您的電腦CPU速度喔 !!
 

資料下載 :
FTDI USB VCP Drivers (.zip)
BOE USB Install for WinXP (.pdf)
BOE USB Install for Win 2k(.pdf)
BOE USB Install for Win ME (.pdf)
BOE USB Install for Win 98 (.pdf)
Oscilloscope Software and Installation Instructions page
Understanding Signals Text (.pdf) / 解析訊號 (Signal) ... 相當棒 !
Understanding Signals Source Code (.zip)

參考資源 :
Components Listing
Screen shot image (.jpg)
Consider the Understanding Signals Parts Kit and Text (includes scope)
 

 

[回首頁]

飆機器人專賣店

TEL: 02-28806977 ; 0933-278-345

Email : sales@playrobot.com