麵包板專用電源模組 5V/3.3V

DTB0052

麵包板專用電源模組 5V/3.3V是專門搭配麵包板使用的電源模組。輸入電壓為6~12VDC可以使用兩線輸入或者是電源插頭(∅5.5x2.1mm),輸出電壓可調整為5V or 3.3V。非常適合創客在設計實驗電路上使用。

更多資訊

NT$ 410 含稅

-NT$ 325

NT$ 735 含稅

更多資訊

產品簡介:

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard.

Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/5V).

The two sets of four GND and VCC holes are spaced such that when connected to our Basic Breadboard both power busses will be powered.

Note: Headers are not supplied. You will need to supply your own headers to connect this board to a breadboard. Check below for some breakaway header strips.

 

產品規格:

  • 6-12V input voltage via barrel jack or 2-pin header
  • 3.3V or 5V regulated output voltage
  • 800mA Operating Current
  • ON/OFF switch
  • Output voltage select switch
  • Power status LED
  • PTC fuse protected power
  • 5.5x2.1mm center positive barrel jack
  • Dimensions: 2.15x0.65"

 

文件下載: