TB6612FNG 1A 雙軸馬達驅動器 直流馬達驅動器(庫存:1)

MOM0034

TB6612是雙驅動,也就是可以驅動兩個電機,相對於傳統的L298N效率上提高很多,體積上也大幅度減少!

TB6612FNG 直流馬達驅動器可以驅動1.2A(堵轉3.2A)的直流馬達。工作電壓2.7~5.5VDC,馬達最大電壓為15VDC。

更多資訊

NT$ 189 含稅

更多資訊

產品介紹:

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

 

產品規格:

  • Power supply voltage: VM=15V max, VCC=2.7-5.5V
  • Output current: Iout=1.2A(average) / 3.2A (peak)
  • Standby control to save power
  • CW/CCW/short brake/stop motor control modes
  • Built-in thermal shutdown circuit and low voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1" spaced pins
  • Filtering capacitors on both supply lines
  • Dimensions: 0.8x0.8"

 

文件下載: