【清館特賣】13MP MIPI Camera Board for nVIDIA Jetson TK1

產品簡介：

e-CAM130_CUTK1 is a 13.0 Mega Pixel, 4-lane MIPI CSI-2 Camera solution for nVIDIA® Tegra K1 CPU. The e-CAM130_CUTK1 has 13MP camera module and an adapter board to connect the camera with the Jetson TK1 development kit.
 
The Jetson TK1 development kit is an full-fledged platform for Tegra K1 embedded applications. The e-CAM130_CUTK1 camera is interfaced to the Jetson development kit through 4-lane MIPI CSI-2 interface. e-con provides the full-fledged MIPI CSI-2 camera driver for this module that enables the customers to take full advantage of 4-lane MIPI CSI-2 interface supported by the nVIDIA® Tegra K1 CPU. The e-CAM13_CUTK1 camera is exposed as a standard V4L2 device and customers can use the V4L2 APIs to access this camera and control the same.
 

產品規格：

• Houses e-CAM130_CUMI1820_MOD - 13.0 MP Camera Module with S-mount lens holder
• High-speed 4-lane MIPI CSI-2 interface to connect with the CPU
• Plugs in to nVIDIA® Jetson TK1 Development Kit
• Leverages the 4-lane CSI-2 interface for maximum frame rate across all resolutions
• Linux camera driver (V4L2) for 13MP MIPI CSI-2 camera module
• Android camera driver *
• Sample application for Video/image capture & Preview
• Board size( L x B x H): 65.27 mm x 55 mm x 27.3 mm
• Board Weight -
  • 30.5 Grams (without lens)
  • 35.5 Grams (with lens)
• 125pin through hole mating connector
• 13Mega pixel camera module e-CAM130_CUMI1820_MOD with S-mount lens holder
• Based on Aptina AR1820HS sensor and on-board Image Signal Processor
• Supports uncompressed YUV422 format and compressed MJPEG format
• High-speed 4-lane MIPI CSI-2 interface
• S-mount lens holder for interchangeable lenses as per application requirement
• Small form-factor camera module
• Field-of-View: Changes with the resolution and aspect ratio for the same lens. Please refer the datasheet for more information
• Pixel Size - 1.25 µm x 1.25 µm
• Max S/N ratio- 36.3 dB
• Dynamic Range - 65.8 dB
• Power requirements: Approximately 2.5W
• Temperature Range
  • Operation : -30° to 70° C
  • Stable Image : 0° to 50° C
• Module Size:
  • Length x Width :30mm x 30mm
  • Height depends on the lens

文件下載：

• 請於此下載