Solar Panel Charger - 10W


有項目需要一些強大的功能嗎?這款太陽能電池板充電器是一種輕巧、超薄(2毫米)且價格合理的電源好選擇。該面板帶有5V USB連接通訊埠。該面板在開闊的陽光下能夠產生10瓦的功率,在1700mA時的峰值功率輸出約為6V。


USB 傳輸線 (方頭) --- Arduino適用

Type-C 電源開關線 --- Raspberry Pi適用

micro USB傳輸線 --- 通用


NT$ 725 含稅



有項目需要一些強大的功能嗎?這款太陽能電池板充電器是一種輕巧、超薄(2毫米)且價格合理的電源好選擇。該面板帶有5V USB連接通訊埠。該面板在開闊的陽光下能夠產生10瓦的功率,在1700mA時的峰值功率輸出約為6V。

This panel features a monocrystalline silicon material to provide a 20% high photoelectric conversion rate. With a frosted surface makes the panel scratch resistant and more durable. This also has a water resistant epoxy resin seal. The panel is slightly flexible making it considerably lighter than equivalent glass based panels. Because it is light weight this panel is designed for temporary installation on windows (that's what the included suction cups are for) but can be permanently installed. If you're considering permanent installation, note that the DC buck on the back of the panel is not fully waterproof. As long as the panel is mounted with the connector pointed down the panel should survive quite well outdoors.

The panel weighs 3.3648 ounces and measures 259.60mm x 139.69mm x 2.46mm (9.83mm thickness at the USB port).




  • 1x Solar Charger
  • 2x Carbiners
  • 4x Suction Feet (useful for mounting to windows)



  • Solar Output: 6V, 1700mA
  • Output: USB 5V, 1200mA
  • Water resistance: IP65
  • Material: Monocrystalline Silicon
  • Test Output using variable load vs. measure voltage:Load / Measured Voltage
    • No Load / 5.15V
    • 100mA / 5.12V
    • 200mA / 5.09V
    • 300mA / 5.06V
    • 400mA / 5.03V
    • 500mA / 5.00V
    • 600mA / 4.94V
    • 700mA / 4.91V
    • 800mA / 3.13V
    • 900mA / 2.72V
    • 1000mA / 2.33V
  • Dimensions: 259.60mm x 139.69mm x 2.46mm (9.83mm thickness at USB port)
  • Weight: 3.3648 ounces.

Solar Panel Charger - 10WSolar Panel Charger - 10WSolar Panel Charger - 10W