RFduino - Simblee 控制器(庫存:1)

MCO0100

RFduino - Simblee 控制器是RFduino公司最新一代控制器,晶片比舊版體積更小更省電也將RAM從8kB提升到24kB。硬體與舊版模組完全相容,可直接替換使用。

更多資訊

NT$ 1,050 含稅

-NT$ 210

NT$ 1,260 含稅

更多資訊

產品簡介:

RFduino - Simblee 控制器是RFduino公司最新一代控制器,晶片比舊版體積更小更省電也將RAM從8kB提升到24kB。硬體與舊版模組完全相容,可直接替換使用。

*****原廠授權獨家代理*****

RFDuino 系列產品是將Arduino系列的控制器全部縮小、微型化與無線化(wireless)!相信許多Arduino的用戶,會希望Arduino微型化如手指尖大小(finger-tip_的版本來取代你原本像手掌大的控制器。它完全相容於Arduino,並內建藍芽4.0,低耗電。可大大提升你的專案製作能力與領域。

The Simblee 7-pin DIP board is a finger-tip sized, Arduino compatible, wireless enabled microcontroller. What makes the Simblee great is the fact that it not only runs Arduino code and can do everything an Arduino can but it also allows you to define a User Interface for your smartphone in the Arduino code. When used in conjunction with the RFduino USB shield, simply plug the RFduino into a USB port of any computer and use the Arduino IDE to load your Arduino sketch, which automatically begins running on the Simblee board. Then you can detach the RFduino USB shield and plug the Simblee directly into your project. It’s that easy!

The Simblee is a Bluetooth 4.0 Low Energy BLE RF Module with Built-In ARM Cortex-M0 for rapid development and prototyping projects. The Simble operates at 3.3V and only uses 10mA in RX mode (<3uA ULP), it also transmits on a 2.4 GHz band, and offers 128KB of flash memory with 24KB of RAM. Via a Bluetooth connection with your smartphone you can control or read data from your Simblee board in a custom interface.

Note: The Simblee board requires USB Shield for programming.

Note: The custom user interface requires a smartphone app. The app is currently available for iOS and should be available for Android in early 2016.

 

產品規格:

  • Operating Voltage: 3V (Max 3.6V, Low 1.8V)
  • Transmit/Recieve Current: 8-16mA (<3uA ULP)
  • ARM Cortex M0 processor (running at 16MHz)
  • 128KB Flash
  • 24KB RAM
  • Build iPhone and Android apps without Xcode or the Android SDK
  • Built in AES encryption engine
  • -93dBm receiver sensitivity
  • -55dBm to +4dBm TX power
  • 7 GPIO pins (6 with 10-bit Analog input)
  • PWM, UART, SPI, I2C capabilites on most GPIO pins
  • UART Programming over USB or Over the Air Programming
  • CE, ETSI, IC, TELEC, and FCC approved

 

文件下載:

配件