RFduino - PCB USB 擴充板 (庫存數:5)

MCO0062

RFduino - PCB USB 擴充板適用於任何的USB接口,主要是用來將程式上傳到 RFduino / Simblee DIP模組。此為PCB USB 型式。

更多資訊

NT$ 1,040 含稅

更多資訊

產品簡介:

RFduino - PCB USB 擴充板適用於任何的USB接口,主要是用來將程式上傳到 RFduino / Simblee DIP模組。此為PCB USB 型式。

*****原廠授權獨家代理*****

RFDuino 系列產品是將Arduino系列的控制器全部縮小、微型化與無線化(wireless)!相信許多Arduino的用戶,會希望Arduino微型化如手指尖大小(finger-tip_的版本來取代你原本像手掌大的控制器。它完全相容於Arduino,並內建藍芽4.0,低耗電。可大大提升你的專案製作能力與領域。

This is the RFduino PCB USB Shield, a small add-on board that plugs into any USB port and is used to load your sketches onto an RFduino module. This shield is almost identical to the RFduino USB Shield and provides the same basic function. The PCB USB Shield can be attached to any solderless breadboard with the RFduino DIP plugged on top or even below it for better ease of use. Once your code is loaded onto the RFduino, this USB Shield can be detached!

On-board the RFduino PCB USB Shield is a 3.3V regulator which can be used to supply power to the RFduino DIP module as well as other shields and possibly the rest of your circuit.

Note: This board or the PCB Shield are required to load code onto your RFduino.

 

產品規格:

  • FT231XQ-R USB Controller
  • Max Current: 500mA
  • Serial Interface: RX, TX, RESET

 

文件下載:

配件