ESP32-CAM Development Board(with camera)

CEE0051

ESP32-CAM (含OV2640攝像頭模組)  

WiFi+藍牙 Camera 開發板

QR識別、監控、穿戴裝置、AI裝置

更多資訊

NT$ 420 含稅

更多資訊

產品簡介

Espressif Systems ESP32 has many new interfaces over ESP8266, but still lacks a hardware camera interface like DVP or MIPI CSI. However, it’s still possible to connect a camera to the I2S interface. What? Isn’t I2S used for audio? It turns out there’s more to ESP32’s “I2S  interface” as pointed out in the forums
The I2S subsystem in the ESP32 also provides a high speed bus connected directly to RAM for Direct Memory Access. Putting it simply, you can configure the ESP32 I2S subsystem to send or receive parallel data under hardware control.ESP32-CAM

產品規格

ESP32-CAM board specifications:
  • Wireless Module- ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM
  • External Storage – micro SD card slot up to 4GB
  • Camera
    • FPC connector
    • Support for OV2640 (sold with board) or OV7670 cameras
    • Image Format – JPEG( OV2640 support only ), BMP, grayscale
    • LED flash light
  • Expansion – 16x through-holes with UART, SPI, I2C, PWM
  • Misc – Reset button
  • Power Supply – 5V via pin header
  • Power Consumption
    • Flash LED off – 180mA @ 5V
    • Flash LED on to maximum brightness- 310mA @ 5V
    • Deep-sleep – 6mA @ 5V min.
    • Modem-sleep – 20mA @ 5V min.
    • Light-sleep – 6.7mA @ 5V min.
  • Dimensions – 40.5 x 27 x 4.5 mm
  • Weight- 10 grams
  • Temperature Range – Operating: -20 ℃ ~ 85 ℃; storage: -40 ℃ ~ 90 ℃ @ < 90%RH
ESP32 Camera Board
The board needs to be programmed with ESP-IDF as explained in details in Github, and there’s no Arduino IDE support. So if you’r not comfortable with using Espressif development framework better skip this board.The demo code takes a QR code, and outputs it as ASCII code in the serial console.ESP32 QR Code Camera
While the board is still shown to be on pre-order, shipping is scheduled for today (September 30th). If the information in Github is not complete enough, Seeed Studio product page has more links to documentation in English, and A.I. Thinker also setup a wiki (in Chinese only).

Part List

Ai-Thinker CAM Development Board 1
Camera Module-OV2640-FPC-24P-0.5mm-21mm- 2 Megapixel 1
Headers-2.54mm-1x8pin 2